Ingco Rotary Hammer Drill 1500W SDS-Plus | 32mm Concrete Capacity, 5.5J Impact Energy, Anti-Vibration, with Drills, Chisels & Carry Case

The Ingco Rotary Hammer Drill 1500W is designed for anyone who needs a dependable, heavy-duty tool for working with concrete, brick, steel, and wood. With its strong motor, multiple functions, and practical accessories included in the kit, this machine gives you the ability to drill, hammer, and chisel without needing separate tools.

Power and Performance

At the heart of this rotary hammer is a 1500W motor, powered by standard 220–240V at 50/60Hz. This setup produces a no-load speed of 850 rpm, which is more than enough for fast drilling across a range of materials. When hammering, it delivers an impact rate of 4400 blows per minute with an impact energy of 5.5 joules. That means every strike has enough force to break through tough materials like reinforced concrete while still giving you control over lighter jobs.

Drilling Capacity

This tool is made to be versatile. It has a maximum drilling capacity of 32mm in concrete, 13mm in steel, and 40mm in wood. For most construction or renovation tasks, that range covers almost everything: anchor holes, rebar dowels, conduit channels, fixture installation, and more. If you are working across different materials in a single project, this single machine handles them without issue.

SDS-Plus Chuck System

The hammer uses an SDS-Plus chuck system, which makes changing bits quick and secure. You don’t need to tighten a traditional keyed chuck—just push the bit in and lock it. This design ensures maximum energy transfer from the tool into the bit, so you get effective drilling and chiseling without wasted effort. It also reduces downtime on site when you need to swap between drilling and chiseling attachments.

Anti-Vibration Design

Working with concrete can be tiring on the hands and arms. This Ingco model comes with an anti-vibration system built into the body and handles. The system reduces the impact you feel from the hammering action, which makes longer tasks less fatiguing and improves accuracy. You’ll find it easier to maintain control when starting holes or chiseling precise lines in masonry.

Modes of Operation

The rotary hammer can switch between different working modes depending on your task. Use it as a rotary drill for wood and steel, as a hammer drill for masonry, or switch to hammer-only mode for chiseling. The selector dial is simple to operate, and once set, the tool delivers consistent performance for the chosen function.

Accessories Included

This package is more than just the tool itself. It comes with:

• 3 drills (for common masonry hole sizes)

• 2 chisels (for light demolition and surface removal)

• 1 set of extra carbon brushes (to extend motor life)

• A durable BMC carry case for safe storage and transport

The included accessories mean you can start working immediately, without needing to buy additional bits or chisels for basic jobs. The spare carbon brushes are particularly useful—when the originals wear down, you have replacements ready, which helps keep the tool running at peak performance for longer.

Handling and Build

The tool’s design is practical and solid. The side handle can be attached for two-handed control, helping you keep the bit steady and counteracting torque when drilling larger holes. The main grip is shaped for comfort and is positioned to balance the weight of the tool so that you don’t have to fight against it. The body is built from durable materials that stand up to regular site use.

Applications

This rotary hammer is suitable for a wide range of jobs, such as:

• Drilling anchor and fixing holes into concrete and stone

• Running conduit or pipe channels through walls

• Installing rebar dowels in reinforced concrete

• Removing tiles, mortar, or old plaster

• Chiseling small channels for repair work

• Drilling into wood or steel when the job requires it

Whether you’re a contractor, electrician, plumber, or homeowner tackling serious renovation, this hammer drill covers most of the heavy drilling and light demolition work you’ll encounter.

Maintenance and Care

Like all power tools, a little care extends its working life. Clean the tool after use, especially around the air vents. Store it in its carry case when not in use. Replace carbon brushes when needed—the extra set provided makes this straightforward. Always use the right SDS-Plus bits for the material, and let the hammer action do the work rather than forcing the bit.

Safety Guidance

Use protective glasses and hearing protection when operating this tool. Always grip both handles while drilling or chiseling to control kickback. Secure your work area, especially when drilling overhead. Follow the instructions in the manual for safe bit insertion and mode switching.

Voltage:220-240V~50/60Hz
Input power:1500W
No-load speed:850rpm
Impact rate:4400bpm
Impact energy:5.5J
Max.drilling capacity:
Concrete:32mm
Steel:13mm
Wood:40mm
SDS plus chuck system
Anti-vibration system
With 3 drills and 2 chisels
With 1set extra carbon brushes
Packed by BMC